Home Products DISCS STACK SEPARATORS
0%

    DISCS STACK SEPARATORS
    Centrifugal separators are intended for mechanical separation of solid-liquid or solid-liquid-liquid suspensions. Separators are widely used in olive oil, dairy products, food and beverage production, juice production, oil refining and oil recovery. The separators consist of the bowl group rotating at high speed, the drive mechanism that moves the bowl group and a frame construction carrying these elements. HAUS separators ensure the continuous and rapid removal of solids during the process of separation of the feed product into phases. HAUS separators ensure that solid particles are removed from the bowl group by discharging unwanted solid particles quickly and without interrupting the product feed during the process of separation of the feed product into phases. Thanks to its high centrifugal force and fast discharge systems, it saves time and energy. Minimum particle size that can be separated is directly related to the viscosity of the fluid, density difference between phases, capacity and the design of the selected separator. Based on its extensive process knowledge and experience, HAUS provides the most suitable separator model for its customers. This enables solid particle separation up to 1 μm in specific processes.

    Separators can be classified into three different configurations as purifiers, concentrators and clarifiers according to their application areas. Clarifiers provide cleaning of unwanted solids and obtaining a clean and sediment-free product by separating solid-liquid mixtures, while minimizing the need and costs of filtration in the processes where filtration is compulsory. Purifiers are designed to separate liquid-liquid mixtures, while concentrators are designed to separate liquid-liquid mixtures from each other and to adjust the concentration of the light phase to the desired value. Purifiers and concentrators provide high efficiency separation and are effective in solid particle cleaning. According to your needs; there are manual separators that can be easily removed and cleaned manually and automatic discharge separators which remove unwanted solids out of the bowl quickly and effectively without interrupting the product supply.

    HAUS separators have high separation efficiency, quiet operation, low power consumption, easy operation, high hygiene and superior material quality. Operating parameters (solid discharge frequency, etc.) can be easily changed with the touch screen panel on the separator panel and can be easily integrated to fully automated plants. The materials used in HAUS separators are selected according to the requirements of the sector for which they are designed and international standards. HAUS separators incorporate the latest innovations in separation technologies. HAUS separators provides process-based properties such as cleaning in place(CIP) system, high temperature resistance, erosion protection, corrosion resistance. Separator accesory equipment and piping connections can be changed as desired. HAUS Centrifuge Technologies has a separation solution that meets your needs under any circumstances thanks to flexible project-based works and customizable separation solutions.










    High separation efficiency
    High separation efficiency
    High quality material
    High quality material
    Low noise and vibration
    Low noise and vibration
    Easy control of the working parameters by using HMI and PLC
    Easy control of the working parameters by using HMI and PLC
    Fast and effective solid discharges
    Fast and effective solid discharges
    Drive systems with low power consumption
    Drive systems with low power consumption
    High hygiene and ready for cleaning in place(CIP)
    High hygiene and ready for cleaning in place(CIP)
    Flexible project-based separation solutions
    Flexible project-based separation solutions


    WORK PRINCIPLE
    The product mixture is introduced into the bowl, where it is put into rotation. The centrifugal force results in the product mixture being separated according to density differences. The product is forced to flow through tiny spaced discs, which allows the heavy phase and the light phase to flow in opposite directions. The heavy phase overflows from the periphery through the heavy phase paring disc* (centripetal pump) depending on separator type to exit under pressure. The light phase flows in the center through the light phase paring disc*, depending on separator type also exiting under pressure. The counter-pressure valves on the outlet pipes can be adjusted to regulate the interphase inside the bowl.

    Heavier solid particles accumulate in the in the sludge volume of bowl periphery, from where they are discharged periodically. During partial discharge operation, only the sludge volume is emptied. Differently, the total discharge operation empties the entire bowl volume. Any sequence of partial and total discharge can be programmed into the PLC via the HMI interface, such that it is carried over by the automatic control system.
    * It may vary depending on separator model (free flow / centrifugal pump)





    PRODUCT SERIES

    You May Be Interested In



    HAUS

    How can we help you?


    #BECAUSEWECARE







    HAUS Sales Offices & Service Network
    HAUS agents and authorised services provides reliable and high quality service to all customers around the world.


    800
    Employees
    68000
    Factory Area
    40
    Countries


    SEE ALL AGENTS & OFFICES


    Frequently Asked Questions
    Frequently Asked Questions



    Do you have a question? You can start your search here:


    For the contact information please click here.
    To become a HAUS supplier: https://supplier.hausworld.com/register.php
    HAUS provides products and service to various applications at olive oil, food, environment, energy and industry sectors.
    "For more than 65 years, HAUS has been synonymous with accomplishing high production quality, based on modern technologies; fulfilling customer satisfaction at utmost level dating back to 1954, when the young engineman Hakkı Gözlüklü has opened the doors of HAUS in Aydın and started activities. Between 2010 and 2018, HAUS Ist in İstanbul, HAUS Europe B.V. in the Netherlands, HAUS SEA in Malaysia, HAUS MED SRL in Italy, HAUS IBERICA in Spain and HAUS SA in India were founded. HAUS R&D Center was established in 2015 and the first turbo blower and screw press production began in 2017. Today, having the ability of manufacturing approximately 600 centrifuges annually with over 500 employees based on 32.000 m2 field integrated factory in Aydın - Turkey with latest technology equipment and quality system management, HAUS exports to more than 40 countries. For more detailed information about us: http://hausworld.com/page-17-about-us.html "
    "You can create a request from our contact menu. You can fill the related form with requested details. Our expert sales department will get in contact with you accordingly as soon as possible. To fill the form: http://hausworld.com/contact.html "
    "In case of a breakdown, you should apply to HAUS After Sales Services via e-mail, phone, website, or fax. You can send your service, spare parts and technical information requests by using digital channels. Thus, your service record will be opened and systematic action will be started and you will be returned as soon as possible."