Home Models SDE Series
#BECAUSEWECARE

SDE Series
Screw press is a dewatering machine alternative to the belt press and filter press in applications which require solid and liquid separation. Solid and liquid separation is performed by movable and fixed discs and the cylindrical screen and through compaction of the sludge towards the screen section by Archimedes' cylinder. Screw press is particularly suitable for dewatering of waste water treatment plant sludges and sludges produced at potable water treatment plants, which tend to release their water content easily. It also plays an effective role in terms of environmental health and in dewatering of the wastes produced as a result of industrial processes, energy and foodstuff production processes.

The sludge is required to possess certain conditions in order to allow the screw press to perform an efficient solid-liquid separation. This lets the screw press to assume an effective and efficient role in sludge dewatering processes as a machine which fits to virtually any application that produces waste treatment sludge in the end of the process.

Waste water treatment plant sludges, potable water treatment plant sludges, foodstuff processesing processes such as fruit juice production, dairy production, also production processes which produce waste sludge; paint industry waste sludges, chemical industry waste sludges and energy sector; for example, sludges which can be flocculated easily and separated from filtrate water easily such as chimney washing sludge. Such sludges are increased to the required solid concentration with polyelectrolyte or coagulant in the concentration tank also supplied by HAUS if necessary to ensure the most efficient solid-liquid separation.



This design guarantees a wide working range to increase flexibility during energy efficiency optimization.
This design guarantees a wide working range to increase flexibility during energy efficiency optimization.
Dewatering without clogging with moving and hard disks.
Dewatering without clogging with moving and hard disks.
It is not necessary to stop the product feed during the washing system.
It is not necessary to stop the product feed during the washing system.
The washing does not affect the output values ​​(humidity / solid ratio).
The washing does not affect the output values ​​(humidity / solid ratio).
The washing time and frequency can be adjusted to the desired values ​​via solenoid valves.
The washing time and frequency can be adjusted to the desired values ​​via solenoid valves.
Low energy consumption due to low speed operation system and noise level less than 60 dB.
Low energy consumption due to low speed operation system and noise level less than 60 dB.




PRODUCT MODELS
SDE Series is an alternative solution for dewatering.



TECHNICAL SPECS
INSTALLED MOTOR POWER 0,55 kW
DIMENSIONS (Length * Width, Height) 2480x820, 1720 mm
WEIGHT 850 kg


TECHNICAL SPECS
INSTALLED MOTOR POWER 1,1 kW
DIMENSIONS (Length * Width, Height) 3100x880, 2130 mm
WEIGHT 1500 kg
*HAUS, reserves the right to modify the specifications herein at anytime without prior notice.



PRODUCT SLICE






APPLICATIONS OF THE PRODUCT

You May Be Interested In



HAUS

How can we help you?




#BECAUSEWECARE







HAUS Sales Offices & Service Network
HAUS agents and authorised services provides reliable and high quality service to all customers around the world.


800
Employees
68000
Factory Area
40
Countries


SEE ALL AGENTS & OFFICES


Frequently Asked Questions
Frequently Asked Questions



Do you have a question? You can start your search here:


"For more than 65 years, HAUS has been synonymous with accomplishing high production quality, based on modern technologies; fulfilling customer satisfaction at utmost level dating back to 1954, when the young engineman Hakkı Gözlüklü has opened the doors of HAUS in Aydın and started activities. Between 2010 and 2018, HAUS Ist in İstanbul, HAUS Europe B.V. in the Netherlands, HAUS SEA in Malaysia, HAUS MED SRL in Italy, HAUS IBERICA in Spain and HAUS SA in India were founded. HAUS R&D Center was established in 2015 and the first turbo blower and screw press production began in 2017. Today, having the ability of manufacturing approximately 600 centrifuges annually with over 500 employees based on 32.000 m2 field integrated factory in Aydın - Turkey with latest technology equipment and quality system management, HAUS exports to more than 40 countries. For more detailed information about us: http://hausworld.com/page-17-about-us.html "
HAUS provides products and service to various applications at olive oil, food, environment, energy and industry sectors.
To become a HAUS supplier: https://supplier.hausworld.com/register.php
We manage our overseas service in partnership with our service network all over the world and resolve our customers' spare parts and service requests in the fastest way possible.
To become a HAUS supplier: https://supplier.hausworld.com/register.php
After your machine arrives, the first thing to do is to open the packaging of the machine and check whether there is any damage or deficiency on it. The equipment you have delivered should be kept in a closed and safe environment away from moisture, heat, and humid environments. To be sure that the documents such as usage, operating manual, electrical project sent to you with the machine will not be lost, you should make sure that you secure such documents. You should make sure that the set of tools are correct and complete, and that you keep such tools in a suitable place for use when necessary. You should contact the project department for installation and after your installation is complete, you should contact HAUS After Sales Services for commissioning.