Home Models High Pressure · H Series
#BECAUSEWECARE

High Pressure · H Series
HAUS Turbo Blower, a Centrifugal Compressor with Magnetic Bearing and Variable Speed, is one of the most advanced technology blower on the market. H Series is the high pressure turbo blowers.

Blowers and Air Compressors are extensively used in the waste water plant for the aeration of ventilation pools and the sludge treatment in general, as well as in many industrial processes which need aeration. Magnetic bearing technology is available today able to save up to 40% in terms of operational cost in respect to conventional technology. Thanks to today's technology, it is possible to work in a wider capacity range, flow and energy optimization due to oxygen demand, low noise level, intelligent control and remote monitoring features.

Proven low maintenance and operating costs. Thanks to its compact design, it can easily be installed in small spaces. It is possible to present this technology under competitive conditions with domestic and high standards of mass production facilities. HAUS Turbo Blower is an innovative solution that improves process efficiency and at the same time provides consistent energy and maintenance savings and pays the initial investment cost in a very short time. HAUS constantly develops products for energy saving and more efficient processes by supporting the sustainable growth of its customers.



All in one
All in one
Easy to install
Easy to install
Industry 4.0 Advanced
Industry 4.0 Advanced
High Effifciency Compressor
High Effifciency Compressor
High speed
High speed
Contactless
Contactless
No lubrication
No lubrication
Unlimited Start&Stop
Unlimited Start&Stop




PRODUCT MODELS
H Series is the high pressure turbo blowers.



TECHNICAL SPECS
DIMENSIONS (Length * Width, Height) 3450x2300, 2200 mm
WEIGHT 6300 kg
MIN DISCHARGE PRESSURE 2200 mbar
MOTOR SHAFT POWER 700 kW
MAX PACKAGE POWER 800 kW
MIN FLOW 6.000 m³/h
MAX FLOW 18.000 m³/h


TECHNICAL SPECS
DIMENSIONS (Length * Width, Height) 3450x2300, 2200 mm
WEIGHT 5900 kg
MIN DISCHARGE PRESSURE 2200 mbar
MOTOR SHAFT POWER 500 kW
MAX PACKAGE POWER 600 kW
MIN FLOW 4.200 m³/h
MAX FLOW 12.400 m³/h


TECHNICAL SPECS
DIMENSIONS (Length * Width, Height) 2200x2000, 2200 mm
WEIGHT 3700 kg
MIN DISCHARGE PRESSURE 2200 mbar
MOTOR SHAFT POWER 350 kW
MAX PACKAGE POWER 400 kW
MIN FLOW 3.000 m³/h
MAX FLOW 9.000 m³/h


TECHNICAL SPECS
DIMENSIONS (Length * Width, Height) 2200x2000, 2200 mm
WEIGHT 3700 kg
MIN DISCHARGE PRESSURE 2200 mbar
MOTOR SHAFT POWER 250 kW
MAX PACKAGE POWER 300 kW
MIN FLOW 2.100 m³/h
MAX FLOW 6.200 m³/h


TECHNICAL SPECS
DIMENSIONS (Length * Width, Height) 1800x1500, 1900 mm
WEIGHT 2600 kg
MIN DISCHARGE PRESSURE 2200 mbar
MOTOR SHAFT POWER 170 kW
MAX PACKAGE POWER 200 kW
MIN FLOW 2.000 m³/h
MAX FLOW 4.000 m³/h
*HAUS, reserves the right to modify the specifications herein at anytime without prior notice.



PRODUCT SLICE






APPLICATIONS OF THE PRODUCT

You May Be Interested In



HAUS

How can we help you?




#BECAUSEWECARE







HAUS Sales Offices & Service Network
HAUS agents and authorised services provides reliable and high quality service to all customers around the world.


500
Employees
32000
Factory Area
40
Countries


SEE ALL AGENTS & OFFICES


Frequently Asked Questions
Frequently Asked Questions



Do you have a question? You can start your search here:


"HAUS manufactures a comprehensive portfolio of high-quality centrifuge technology products such as; • Decanter centrifuges, • Disc stack separators, • Continuous system olive oil extraction plants, • Screw presses, • Turbo blowers, • Mobile units and auxiliary equipment and offers familiar service on set-up, turn-key integrated project management, maintenance, spare-parts and aftersales solutions for specific markets and industries."
"For more than 65 years, HAUS has been synonymous with accomplishing high production quality, based on modern technologies; fulfilling customer satisfaction at utmost level dating back to 1954, when the young engineman Hakkı Gözlüklü has opened the doors of HAUS in Aydın and started activities. Between 2010 and 2018, HAUS Ist in İstanbul, HAUS Europe B.V. in the Netherlands, HAUS SEA in Malaysia, HAUS MED SRL in Italy, HAUS IBERICA in Spain and HAUS SA in India were founded. HAUS R&D Center was established in 2015 and the first turbo blower and screw press production began in 2017. Today, having the ability of manufacturing approximately 600 centrifuges annually with over 500 employees based on 32.000 m2 field integrated factory in Aydın - Turkey with latest technology equipment and quality system management, HAUS exports to more than 40 countries. For more detailed information about us: http://hausworld.com/page-17-about-us.html "
HAUS provides products and service to various applications at olive oil, food, environment, energy and industry sectors.
Centrifuge machines are high speed, therefore their maintenance and controls should be done on time. Planned maintenance activities extend the working life of the machines, ensure the continuity of your process and prevent unforeseen breakdown that may occur in the future due to usage error or normal use. For this reason, we recommend you to make a planned maintenance agreement. If you submit your request, our After Sales Services department will contact you for the most appropriate maintenance agreement for your process and needs.
"There are many different situations that can affect the performance of your machine. Here, you should check the pre-equipment process and review the relevant section of your equipment and the user operating manual given to you. After checking the data on the machine by authorized operators, you can contact the Technical Support department and get support for the analysis and control of your data. To get machine information: http://hausworld.com/contact.html "
You must keep the delivery report provided to you during and after commissioning, the sales contract, the operating manual provided with the machine, the electrical project, the checklists prepared by HAUS during commissioning and the service commissioning report for future service and maintenance needs.