Decanter Centrifuge technology offers high capacity, low cost and fast solutions in almost all process and industrial areas (over 2500 applications) that can be separated from each other by density difference. This technology achieves this by efficiently separating the solid and liquid phases (solid-liquid or solid-liquid-liquid) found in the processed products.

    Decanter Centrifuge consists of a bowl rotating at high rpm in horizontal axis to apply the necessary high centrifugal (G) force to provide solid-liquid separation, a spiral conveyor rotating with the bowl at acertain differential speed, a driving group that provides the necessary force to these rotating parts and the chassis (body) that carries all of these parts mentioned above.

    Maximum Performence
    Maximum Performence
    High G Force: a bowl, rotating at very high speed
    Touch Panel
    Touch Panel
    PLC with HMI: to set different automatic mode, to adjust the sludge dryness and other operational parameters, to monitor alarms
    Product Based Performance
    Product Based Performance
    Variable Solid Conveying Speed: to handle different solid quantity with desired dryness
    Flexible Configuration
    Flexible Configuration
    Multiple choice of material of construction, wear protection, motor power, gearbox torque

    As operating principle, decanter centrifuge uses the method of separation of the product fed into solid-liquid phases by applying high centrifugal force and continouosly gaining of these separated phases from different outlets. The product to be separated is fed into the feeding chamber in the spiral conveyor which rotates at high speed by the feeding pipe. By the effect of the centrifugal force, the product enters into the bowl and forms layers through the bowl inner wall according to their density differences. Heavy phase (solid) settles down through the bowl wall and the settled solid phase is conveyed to the solids outlet at the conical part by the conveyor, while the separated liquid phase is gained through the height adjustable plates at the end of the cylindrical part. Conveying of the solid phase is provided by the differential speed between the bowl and the conveyor.

    By the integrated HMI (Human-Machine-Interface) and the PLC (Porgrammable Logic Controller) in HAUS decanters, they can operate at different modes automatically, react automatically against the instantaneous changes in the process and monitor the signals that may occur. Thus, the instantaneous changes in the process can be handled without a need for operator intervention and gaining of product at requested specialties is achieved continuously and without affecting the process flow.

    HAUS decanter centrifuges are presented with Constant Speed Drive System, Dual Drive System or Hydraulic Drive System according to the needs of the process.

    Constant Speed Drive System
    It is a basic system when compared to the other systems and control options are limited. This system is utilized in processes where the rate of the solids amount is constant in the product fed to the decanter and there is no need to adjust the differential speed instantaneously. By the belt-pulley mechanism that is used, a constant differential speed is maintained.

    Dual Drive System
    It is utilized in processes where the rate of the solids amount is variable in the product fed to the decanter and there is a constant need to adjust the differential speed instantaneously. The system is supported by the software developed by HAUS, so the adjustment of differential speed is done without a need for operator intervention.

    Hydraulic Drive System
    It is a system where a hydraulic power is used to automatically adjust the differential speed instead of a mechanical gear. As it has the ability to provide high torque values, it also provides a solution at situations where electrical equipment is not desired on the machine. HAUS decanter centrifuges performs 3-phase separations of solid and two liquid phases which are immiscible with different densities efficiently as well as 2-phase (solid – liquid) separations processes. Light liquid phase is removed by the level-adjustable tubes and the heavy liquid phase is removed by the level-adjustable plates.


    You May Be Interested In


    How can we help you?


    HAUS Sales Offices & Service Network
    HAUS agents and authorised services provides reliable and high quality service to all customers around the world.

    Factory Area


    Frequently Asked Questions
    Frequently Asked Questions

    Do you have a question? You can start your search here:

    "HAUS manufactures a comprehensive portfolio of high-quality centrifuge technology products such as; • Decanter centrifuges, • Disc stack separators, • Continuous system olive oil extraction plants, • Screw presses, • Turbo blowers, • Mobile units and auxiliary equipment and offers familiar service on set-up, turn-key integrated project management, maintenance, spare-parts and aftersales solutions for specific markets and industries."
    To become a HAUS supplier: https://supplier.hausworld.com/register.php
    To become a HAUS agent you may fill the related form: http://hausworld.com/contact.html
    Centrifuge machines are high speed, therefore their maintenance and controls should be done on time. Planned maintenance activities extend the working life of the machines, ensure the continuity of your process and prevent unforeseen breakdown that may occur in the future due to usage error or normal use. For this reason, we recommend you to make a planned maintenance agreement. If you submit your request, our After Sales Services department will contact you for the most appropriate maintenance agreement for your process and needs.
    You can contact the Commercial Affairs department at +90 256 231 0481.
    "In case of a breakdown, you should apply to HAUS After Sales Services via e-mail, phone, website, or fax. You can send your service, spare parts and technical information requests by using digital channels. Thus, your service record will be opened and systematic action will be started and you will be returned as soon as possible."