Home Models Boiler
#BECAUSEWECARE

Boiler
The hot water supply is provided by the heating boiler. Heating unit is consisted of hopper for pomace supply with electric motor fan, boiler, electrical panel. Boilers are manufactured with fully welded construction, semi-cylindrical steel body and special boiler pipes.

WORKING PRINCIPLE
The gases generated as a result of combustion in the furnace section are conveyed from the back of the furnace through the flame pipes to the smoke box.The heat gained is transferred to the water by passing through the pipes. The hot gases which complete the combustion in the second pass fill in the smoke box in the third pass and get rid of from the chimney. Fuel is fed to the boiler automatically with the bunker screw. After setting the temperature, hot water is automatically supplied to the system without touching it. System uses solid fuels like dry pomace and pomace seed. In solid fuel boilers, high combustion efficiency is achieved which cannot be achieved in conventional coal boilers. The water heating boiler is equipped with a fan as standard. The fan is capable of providing the air required for complete combustion.







PRODUCT MODELS



TECHNICAL SPECIFICATIONS
INSTALLED MOTOR POWER 1,12 kW
DIMENSIONS (Length * Width, Height) 2070*840, 1955mm
HEATING POWER 100000 kcal/h


TECHNICAL SPECIFICATIONS
INSTALLED MOTOR POWER 1,3 kW
DIMENSIONS (Length * Width, Height) 2180*970, 2045mm
HEATING POWER 150000 kcal/h


TECHNICAL SPECIFICATIONS
INSTALLED MOTOR POWER 1,67 kW
DIMENSIONS (Length * Width, Height) 2670*1210, 2335mm
HEATING POWER 250000 kcal/h


TECHNICAL SPECIFICATIONS
INSTALLED MOTOR POWER 0,75 kW
DIMENSIONS (Length * Width, Height) 1570*785, 1265mm
HEATING POWER 150000 kcal/h
*HAUS reserves the right to modify the specifications stated here without prior notice to the customer.



PRODUCT APPLICATIONS

You May Also Be Interested



HAUS

How Can We Help You?




#BECAUSEWECARE







HAUS Sales Offices and Service Network
It provides the highest quality service with the most up-to-date technology to all its customers at authorized dealer and service locations in Turkey and around the world.


750+
Employees
100000
Production Area
70
Countries


VIEW ALL DEALERS AND OFFICES


Frequently Asked Questions
Frequently Asked Questions



Have a question? You can start searching here:


"For more than 70 years, HAUS has been synonymous with accomplishing high production quality, based on modern technologies; fulfilling customer satisfaction at utmost level dating back to 1954, when the young engineman Hakkı Gözlüklü has opened the doors of HAUS in Aydın and started activities. Between 2010 and 2018, HAUS Ist in İstanbul, HAUS Europe B.V. in the Netherlands, HAUS SEA in Malaysia, HAUS MED SRL in Italy, HAUS IBERICA in Spain and HAUS SA in India were founded. HAUS R&D Center was established in 2015 and the first turbo blower and screw press production began in 2017. Today, having the ability of manufacturing approximately 600 centrifuges annually with over 750 employees based on 100.000 m2 field integrated factory in Aydın - Turkey with latest technology equipment and quality system management, HAUS exports to more than 70 countries. For more detailed information about us: http://hausworld.com/page-17-about-us.html "
HAUS provides products and service to various applications at olive oil, food, environment, energy and industry sectors.
For the contact information please click here.
You can contact the sales representative who has dealt with you at the order stage and send your request.
After your machine arrives, the first thing to do is to open the packaging of the machine and check whether there is any damage or deficiency on it. The equipment you have delivered should be kept in a closed and safe environment away from moisture, heat, and humid environments. To be sure that the documents such as usage, operating manual, electrical project sent to you with the machine will not be lost, you should make sure that you secure such documents. You should make sure that the set of tools are correct and complete, and that you keep such tools in a suitable place for use when necessary. You should contact the project department for installation and after your installation is complete, you should contact HAUS After Sales Services for commissioning.
We manage our overseas service in partnership with our service network all over the world and resolve our customers' spare parts and service requests in the fastest way possible.